Click image to view full size image
All CRGO material from Baosteel, Wuhan WISCO steel, AK steel, Nippon steel etc.
1, Normally, Internal coil diameter is 508 mm.
2, Coil weight usually range from 3MT to 10MT. Maximum coil outside diameter is 1850 mm.
3, Thickness tolerance and other geometric characteristics
Non-oriented fully processed electrical steels meet all the requirements on thickness tolerance and other characteristics such as edge camber and flatness as specified in the standards EN 10106 and IEC 60404-8-4 and GB standard.
4, Thin non-oriented grades are available at the nominal thicknesses, 0, 27 mm, 0, 20 mm, 0, 18 mm, 0, 12 mm and 0, 10 mm. All are fully processed non-oriented electrical steels, especially suited for use at medium to high frequencies (typically 200 3000 Hz).
1, Normally, Internal coil diameter is 508 mm.
2, Coil weight usually range from 3MT to 10MT. Maximum coil outside diameter is 1850 mm.
3, Thickness tolerance and other geometric characteristics
Non-oriented fully processed electrical steels meet all the requirements on thickness tolerance and other characteristics such as edge camber and flatness as specified in the standards EN 10106 and IEC 60404-8-4 and GB standard.
4, Thin non-oriented grades are available at the nominal thicknesses, 0, 27 mm, 0, 20 mm, 0, 18 mm, 0, 12 mm and 0, 10 mm. All are fully processed non-oriented electrical steels, especially suited for use at medium to high frequencies (typically 200 3000 Hz).